「快速門簾布」堆積門簾布定做更換

「快速門簾布」堆積門簾布定做更換


Customized Replacement of "Fast Door Curtain Cloth" Stacked Door Curtain Cloth

在很多場所快速堆積門使用久了，會出現簾布老舊的現象，也有一些特殊原因，出現門體部分遭到撞擊的現象，如果不及時更換，就會影響快速門的正常使用，降低企業形象。


In many places, the fast stacking doors have been used for a long time, and there will be old curtain. There are also some special reasons. The door body part will be impacted. If it is not replaced in time, it will affect the normal use of the fast stacking doors and reduce the corporate image.
 

用戶要更換快速門的簾布，首先要對原有的簾布進行精確的測量，然后要確定簾布的顏色，是否加視窗，還有抗風筋選擇什么材質。


In order to replace the curtain for fast doors, users should first measure the original curtain accurately, and then determine the color of the curtain, whether to add windows, and what material to choose for the wind-resistant ribs.


更換快速門簾布要選擇專業的常見，這樣加工的簾布才能夠美觀，耐用，在快速門簾布的加工過程中，讓其保持平整服帖是關鍵，有很多用戶會遇到過對堆積門布上有很多褶皺的情況，經分析，原因如下


Replacement of fast door curtain cloth should choose professional common, so that the processed curtain cloth can be beautiful and durable. In the process of fast door curtain cloth processing, it is the key to keep it flat. Many users will encounter many folds on the stacked door curtain. After analysis, the reasons are as follows.


堆積門簾布有褶皺的原因：


Causes of folds in stacked door curtain cloth:


一、門布比較薄 ，使用厚的簾布出現褶皺幾率低一些 。


First, the door cloth is thinner, and the possibility of folding is lower when using thick curtain cloth.


二、使用熱風焊機溫度過高或者過低。


2. The temperature of hot air welding machine is too high or too low.


三、使用縫紉機縫制的時候針腳過密。


Thirdly, when sewing with sewing machine, the stitches are too tight.


四、使用縫紉機的時候縫紉機送布的齒條輸送布的時候自動完成 ，解決的辦法人工輔助輸送 。


4. When using the sewing machine, the rack conveying cloth is automatically completed when the sewing machine feeds cloth, and the solution is manual auxiliary conveying.


五、門布在穿入鋁合金抗風棒的時候沒有抻直處理 。


Fifth, the door cloth is not straightened when it is penetrated into the aluminium alloy wind rod.


六、焊機以及穿布到時候沒有按工藝制作 ，造成堆積門褶皺過多。


6. Welding machine and cloth were not manufactured according to the process at that time, which resulted in excessive folds of stacking doors.


七、使用高頻焊機更容易使門布平整 ，高頻焊機是壓力及溫度粘貼門布 ，熱風機是行走過程中焊接門布 ，所以有形成褶皺的可能 。


7. It is easier to smooth the door cloth by using high frequency welding machine. The high frequency welding machine is to paste the door cloth with pressure and temperature. The hot air fan is to weld the door cloth in the course of walking, so it is possible to form folds.


綜上，堆積門簾布上出現過多褶皺，適合廠家提供的生產原材料以及工人的技術、設備的先進程度有關的。


To sum up, there are too many folds on the stacked door curtain cloth, which is suitable for the raw materials provided by manufacturers and the advanced level of workers'technology and equipment.