「工業門控制箱」先鋒控制箱特點

「工業門控制箱」先鋒控制箱特點


Characteristics of Pioneer Control Box of Industrial Door Control Box

1、電控箱：電控箱面板設有開、關、停三按鍵，并設有急停開關，遇緊急情況可快速切斷控制回路電源，保護人、機安全；


1. Electronic control box: The panel of the electronic control box has three buttons: on, off and off, and an emergency stop switch. In case of emergency, the power supply of the control circuit can be switched off quickly to protect the safety of the person and the machine.

2、控制箱內設有多種接口：紅外、安全氣囊接口，門中門安全保護開關接口歐，警燈接口等；三按鈕開關在開門到位時可輸出無源信號，供特殊場所使用。


2. There are many kinds of interfaces in the control box: infrared, airbag interface, door safety switch interface, alarm lamp interface, etc. When the three-button switch is in place, it can output passive signals for use in special places.


3、遙控器可選配：遙控器為學習碼，您如需要可選配學習碼遙控器。


3. Optional remote control: The remote control is learning code, you can choose learning code remote control if you need.


4、手動開關裝置：在停電等緊急情況下，可通過轉換拉手實現手動與電動開關門轉換，使電動提升門電機減少故障。可靠性更高。


4. Manual switching device: In emergency situations such as power outage, manual and electric switching door can be realized by changing the handle, so as to reduce the fault of electric hoist door motor. Higher reliability.


5、雙凸輪限位：采用雙凸輪限位，安全可靠。


5. Double cam limit: Double cam limit, safe and reliable.


6、提供一個無源信號，方便特殊用戶使用。


6. Provide a passive signal for special users.


在您收到「先鋒工業門控制箱」以及提升門電機后，請您先開箱檢查，產品是否有破損，并根據裝箱檢查隨機附件、資料是否齊全，發現異常及時與我們聯系。


After you receive the "Pioneer Industrial Door Control Box" and the lifting door motor, please open the box first to check whether the product is damaged, and check the random accessories and data according to the packing, and contact us in time if any abnormalities are found.

包括：


Include:


主機 一臺；安裝架 一件，固定套 貳件，平鍵 6*80 一件；外六角螺栓M10*20 四件；平墊圈 四件；控制盒 一只；遙控器 貳套；四芯線 五米；三芯線 五米；緊固螺釘 M8*10   二件；內六角扳手 2.5   一件；說明書 一本；保修卡 一張  ；合格證  一張


One main engine; one mounting frame, one fixed sleeve, one flat key 6*80; four outer hexagonal bolts M10*204; four flat washers; one control box; remote control sleeve; four core wires 5 meters; three core wires 5 meters; fastening screw M8*102; one inner hexagonal wrench 2.5; one instruction book; one warranty card A certificate of qualification

 

「工業門控制箱」先鋒控制箱特點


Characteristics of Pioneer Control Box of Industrial Door Control Box